|CN

Product Categories

Contact us

Bo Yisheng Electronic Technology Co., Ltd.

Contact: Chen Sheng

Tel: 18755511218

QQ number: 646989309

E-mail: eden@boyish.cn

Fax: 0769-81779026

Address: Building A, No. 17, Jinfu Road, Huanan Industrial Park, Tangbian Community, Liaobu Town, Dongguan, Guangdong, China

Water-based environmental clea

Your current location: Home > Product > Water-based environmental clea >

Rosin cleaning solution T1002G TDS

  • Category:Water-based environmental clea

  • Hit count:
  • Release date:2019-08-08
  • 在线询价
  • Detailed introduction

Part I Chemical products and company identification

Chemical Product Name: TENICK T1002G

Recommended use: For the removal of furnace agglomerated flux, fixture high temperature welding residual flux.

Company logo

Brand
Supplier (Company Name / Address / Phone
Company website
TENICK
Singapore  
Supplier name:SINGAPORE TENICK CLEANING TECHNOLOGY PTE.LTD.
supplier address:50 Raffles Place,#34-04 Singapore Land Tower Singapore 048623
supplier phone:(65)65326932 
 

 Part II Hazard Overview

Category: This product is not classified as dangerous
Hazard label:
Health hazards: Excessive contact can cause eye, skin or respiratory irritation
Environmental hazards: No obvious hazards.
Explosion hazard: Non-flammable liquid, no explosion hazard. 
Part III Product Introduction
TENICK is suitable for the thorough cleaning of rosin flux and organic dirt such as precision electronic parts, electronic circuits, copper and aluminum welding parts.
It is an environmentally friendly low foaming water based ultrasonic, spray cleaning type, non-combustible, non-explosive, mild odor, suitable for precision electronic parts, electronic circuits,
Water-based cleaning agent for rosin flux and organic soil cleaning on copper and aluminum welded parts.
Part IV Product Performance
Project
Technical indicators
Exterior
Colorless to pale yellow transparent liquid
Boiling point (°C)
≥100℃ 
Relative specific gravity (20 ° C)
1.05±0.05 
Water soluble
Soluble
pH (10% DI water dilution) 
9.5±0.5

 Part 5 Product Features

1. Low foaming water-based environment-friendly type, non-flammable and explosive, with mild odor.
2. Strong cleaning ability, strong removal of flux residue and organic matter.
3. Contains anti-rust factor to prevent corrosion of precision devices.
4. It is easy to rinse without residue, and the device is bright as new after cleaning.
5. Long cleaning life, multiple use, safe and effective.
Part VI Usage and precautions
1. Stock solution: water (deionized water) = 1: 2 used after dilution.
2. The cleaning temperature range is 50 ± 5 °C. Cleaning time is 3 to 5 minutes.
3. Can not be mixed with any other cleaning solution.
4. Please refer to the MSDS data of this product for safe use instructions.
Part VII Storage matters 
1. Warranty period: 1 year (sealed)
2, stored in a good place at room temperature, cool, dry, ventilated, avoid high temperature direct, humidity between 30% - 90%;